Technical Instruction TSD0079f - Substation Battery Chargers and Batteries (PDF File, 1.0 MB)
This instruction describes the Substation Battery Chargers and Batteries that are available for installation on contract 09003
|
26 Mar 2020 |
Technical Instruction - TSD0204b - Substation Disconnectors (PDF File, 1.2 MB)
Technical Instruction -TSD0204 - Substation Disconnectors
This Technical Instruction lists the disconnectors currently available for use in substation projects and replaces the Substation Disconnectors sections in Technical Instruction - TSD0058f - Disconnectors, Station Post Insulators & Surge Arresters
|
15 May 2020 |
Standards Alert StdsA562 - New Haze Battery Racks (PDF File, 1.4 MB)
This Standards Alert is to advise that changes have been made to the Haze Battery Racks.
|
26 Mar 2020 |
STNW3039 - Network Physical Security Design Reference (PDF File, 662.5 KB)
The purpose of This Document is to provide guidance to achieve a consistent approach to applying physical security controls for Network assets and is targeted at EQL internal stakeholders, consultants and architects for the design and application of physical security controls consisting of electronic security systems. This document is not intended to be a detailed design.
|
27 May 2020 |
Standards Alert StdsA549 - Prov Dual DC Supplies in Subs with Connect to Direct Market Participants (PDF File, 1.3 MB)
This Standards Alert is to clarify the requirements for dual and single battery strings in substations where there are EQL connection assets to direct market participants.
|
25 Mar 2020 |
STNW3037 Standard for Substation Signage (PDF File, 2.3 MB)
This Substation Standard outlines the safety, operational and functional signage application standards for zone substation and switching station sites. It establishes the guidelines for the design, manufacture, and installation of operational and safety signs at Ergon Energy Corporation Zone Substation sites.
|
26 Jun 2020 |
Standards Alert StdsA421 - Ratings Parameters and Assumptions for Large Renewable Connections (PDF File, 583.8 KB)
This Standards Alert highlights the changes to our distribution networks rating parameters in determining network capacity for large generator connections including renewables.
|
4 Oct 2018 |
STNW3007 - Climate & Seismic Standard for Substations (PDF File, 624.6 KB)
This standard is designed to outline the climatic and seismic requirements applicable to the design of Energy Queensland (EQL) substations connected to the EQL network.
|
3 Apr 2020 |
Standards Alert StdsA550 - Provision of AC Supplies in Substations with Limited Access to Nearby Local Distribution Network (PDF File, 1.2 MB)
This Standards Alert is to clarify the requirements for AC supplies in substations where there is limited access to nearby local distribution network.
|
25 Mar 2020 |
STNW3014 Standard for Busbar Design (PDF File, 1.5 MB)
This standard provides guidance on the selection of busbar type and application.
|
26 Jun 2020 |
Standards Alert - StdsA528 - Site Specific Substation Fire Risk Assessment (PDF File, 1.2 MB)
Standards Alert - StdsA528 Site Specific Substation Fire Risk Assessment
The requirements for fire protection in substations are laid out in the joint standard STNW 3035 (Ergon) and RED 1886 (Energex). Clause 5.3 in this standard lays out the requirement under AS2067 for HV substations where a site specific risk assessment on the fire risk at a substation should be undertaken. An Excel based tool has been created to undertake these risk assessments
|
1 Jan 2019 |
Technical Instruction - TSD0202 Use of Fence Detection Systems in Substations (PDF File, 792.0 KB)
TSD0202 Use of Fence Detection Systems in Substations
This Technical Instruction introduces the use of fence detection systems for security of Energy Queensland substations.
|
6 Dec 2019 |
StdsA579 - STNW3039 Network Security Design Reference Release Notification (PDF File, 673.7 KB)
Standards Alert - StdsA579 - Network Security Design Reference Release Notification to provide notification and summary of STNW3039 - Network Physical Security Design Reference which has now been Published.
|
27 May 2020 |
STNW3392 - Standard for the use of CAD Software Ver 3 (PDF File, 242.9 KB)
The purpose of this document is to provide readers with the CAD Standards adopted by Ergon Energy for the disciplines of electrical, mechanical, civil, transmission lines, mapping and communications areas for construction and maintenance activities.
|
5 May 2016 |
STNW3001 - Standard for Substation Equipment Identification (PDF File, 1.5 MB)
This document sets out the general requirements for substation electrical design
drawings with respect to equipment identification codes, voltage colours for single line operating diagrams, indicator light colours, small wire numbering and small wire colouring.
|
26 Jun 2020 |
Standards Alert StdsA563 - Revised Substation Battery Size Calculator (PDF File, 1.2 MB)
This Standards Alert is to advise of the release of Version 2.5 of the Substation Battery Size Calculator
|
26 Mar 2020 |
Technical Instruction - TSD0198 - MESSKO® MTraB® self-regenerating silica gel breathers for liquid-immersed transformers. (PDF File, 1.8 MB)
TSD0198 MESSKO® MTraB® self-regenerating silica gel breathers for liquid-immersed transformers.
To reduce maintenance costs, and to minimise the risk of saturated breathers allowing moisture to infiltrate the conservator, Energy Queensland Asset Lifecycle Management is retro-fitting MESSKO® MTraB® self-regenerating silica gel breathers to selected transformers and tap-changers.
|
1 Jan 2019 |
Standards Alert - StdSA581 - Constant Force Springs for Earthing of Screen Multicores (PDF File, 804.4 KB)
Standards Alert StdSA581 - Constant Force Springs for Earthing of Screen Multicores.
Constant Force Springs (CFS) are a mature technology and have been a standard in the 33kV and 11kV underground cable space in the South East for 15+ years. Several successful trials of Constant Force Springs have been completed within the Northern and Southern Regions for the earthing of Double Brass Tape multicore. As a result, Constant Force Springs are now an approved method of earthing the brass tape screen of a multicore cable
|
1 Jul 2020 |
Technical Instruction TSD0205 - Substation Busbar Fittings (PDF File, 1.2 MB)
This Technical Instruction lists the busbar fittings currently available for use in substation projects
|
26 Mar 2020 |